54mm STEERING DAMPER CLAMP
10” (25cm) Powerlet Converter Cable
Convert any device that has a cigarette type (US) plug to a Powerlet (BMW/European type), including cell phones, radar detectors, air compressors, etc. It can be used with the following HeliBars handlebar risers or replacement handlebar systems.
HR04042 for the Kawasaki® Concours14,
SA00207UN for the Can-Am Spyder®
HR01033 for the Honda® ST1300,
HR01052 for Honda
HR05056 for the BMW® F800ST
HR01052 for the Honda® NT700
HST01060 optional cover for Honda® ST1100 multi adjustable bars
HST01061 optional cover for Honda® ST1300 multi adjustable bars
HST04058 optional cover for Kawasaki® Concours14 multi adjustable bars
Wiring Harness
150-0034
Complete wiring kit provides everything necessary to wire your Powerlet Outlet to your motorcycle’s battery.
Description:
Harness features:
Heavy duty black vinyl sheathing to protect wires Shrink tubing on all pre-fitted connectors Red & Black clearly marked connectors for fast installation to battery Push in automotive style fuse with water proof cover Rubber Boot not included.Custom made for HeliBars applications this is a high quality product that is extremely well made and can be used with the utmost confidence.
Used with the following products:
HR04042 for the Kawasaki® Concours14, SA00207UN for the Can-Am Spyder® HR01033 for the Honda® ST1300, HR01052 for Honda HR05056 for the BMW® F800ST HR01052 for the Honda® NT700 HST01060 optional cover for Honda® ST1100 HST01061 optional cover for Honda® ST1300 HST04058 optional cover for Kawasaki® Concours14
HST Optional Pilot Cover
Description:
The HST Optional Pilot Cover offers a power source at a convenient location. Comes with Ram Ball, Power Outlet and Hardware. Easily mounts on your stock HST Adapter base. Wiring for the outlet not included but can be found here: 150-0034 – Wiring Harness
Heli Zumo GPS Mount for LST (GL1800/F6B) Handlebars
HeliMount is designed to integrate with the LST system and easily installs with one M6 socket head cap screw and washer. HeliMount can be installed on the left or right side. HeliMount is configured for Garmins 550 and 660/665 units but can be easily modified for other devices.
Replaceable bar end sliders (dampers) for TS7706
Ducati 848/1098/1198 HELIBARS
Replacement polished alloy cap for HZ (Harley) Helibars
P.O.A.
Honda VFR800 Replacement Handlebars, (2002-2010)
UP 31.75 mm BACK 38mm, retain stock hydraulic lines, cables and bar-end weights
Also available in Black; part number HB01003BA
Honda VFR800 Replacement Handlebars, Black Finish (2002-2012)
(Photo is of silver model)
Description:
2008 marked the 20th year of VFR HeliBars® production, and to celebrate this success we re-engineered and re-styled this icon of sport touring comfort.
First we studied the immense amount of feedback weve received from our VFR customers over the years. The height, setback and angles of our current VFR800 HeliBars so perfectly match the ergonomics of this machine that only a few desire any change at all. What some wished for was the ability to adjust the bars a bit higher. As always, we listened.
In 2008, our new VFR800 HeliBars receive a low profile clamping lug with one 8mm pinch bolt. This slimmer clamp allows the bar to be raised while still providing full clamping pressure on the fork tubes. A new riser tube with a smaller diameter and a thicker cross section was engineered to increase rigidity and strength while reducing the transfer of what little vibration emanates from the V-Four.
One of the best features of our new VFR HeliBars is the price. Because of our continued commitment to manufacturing improvement and the addition of new high speed, high precision CNC machines, we are able to offer the new VFR HeliBars without a price increase.
Ride with confidence knowing you are riding with the safest, most comfortable set of handlebars available.
HeliBars® Honda VFR800 replacement handlebars
1 1/4 taller 1 1/2 rearwardRetains: Stock Cables, Hydraulic Lines and Bar Ends
Honda VFR800 Replacement Handlebars
(1998-2001)
Description:
2008 marked the 20th year of VFR HeliBars® production, we celebrated this success by re-engineering and re-styling this icon of sport touring comfort.
First we studied the immense amount of feedback we had received from our VFR customers over the years. The height, setback and angles of our previous VFR800 HeliBars so perfectly matched the ergonomics of this machine that only a few desired any changes at all. What some wished for was the ability to adjust the bars a bit higher. As always, we listened.
This model VFR800 HeliBars receive a low profile clamping lug with one 8mm pinch bolt. This slimmer clamp allows the bar to be raised while still providing full clamping pressure on the fork tubes. A new riser tube with a smaller diameter and a thicker cross section was engineered to increase rigidity and strength while reducing the transfer of what little vibration emanates from the V-Four.
Ride with confidence knowing you are riding with the safest, most comfortable set of handlebars available.
HeliBars® Honda VFR800 replacement handlebars
1 1/8 taller 1 1/2 rearwardRetains: Stock Cables, Hydraulic Lines and Bar Ends and Silver Powder Coat
Honda CBR1100XX BLACKBIRD
Replacement Handlebars (1997-2007)
Description:
Newly updated design utilizes a more compact, low profile fork tube clamp with a single 8mm pinch bolt. Hand Tig welded construction with flawless aircraft quality welds.
1 5/8” Taller 1” Rearward 1 1/2” Wider (27”) Retains all stock lines and cables Silver Powder Coat Finish
Honda VFR1200 Standard Replacement Handlebars
(2010-2013)
Description:
Heli Modified started making VFRs more comfortable in 1986 and has sold tens of thousands of HeliBars to VFR customers around the world. Heli Modified knows VFRs, and VFRs with HeliBars equals Comfort Without Compromise! Check out the recent articles in Motorcyclist Magazine Dec 2011 & June 2012 !
The new VFR’s fairing and fuel tank really created a design challenge for the development of a HeliBar to improve the stunning new machine’s long distance comfort. It took several prototypes and lots of refinements to get it right, nearly 3 times longer than our normal development time for a new HeliBar design. The time was well spent and we are very excited about our newest member of our VFR HeliBar Family.
Although, this bar is not as tall and rear offset as some owners might like, we designed a HeliBar with the most comfortable hand position the bike would allow and it works with all stock hydraulics, cables and control wire looms. **
2” (50 mm) Taller 1” (25 mm) Rearward 1” (25 mm) Wider (at 26 1/2) 8 degree reduction in downward angle 3.18 degree reduction in rearward angle **Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.**NOTE: When R&D was conducted on the VFR1200 & VFR1200 DCT the stock bikes did not include the optional wind screen. The optional wind screen can interfere on the left side at full lock to lock. We have heard from the field that pulling the left bar back towards the rider as close as possible without contacting the fairing alleviates this situation.
This does NOT fit the DCT version.
Honda VTR1000 Replacement Handlebars
(1997-2005 only)
Description:
1 1/8” taller than stock 1/2” more rearward 1/2” wider than stock.NOTE: All measurements are taken at the hand location.
HONDA VFR750 1994-1997 HELIBARS
Description:
Re-Designed for 2012,
Limited Production The VFR750 HeliBars now have a low profile clamping lug with one 8mm pinch bolt. This slimmer clamp allows the bar to be raised while still providing full clamping pressure on the fork tubes. A new riser tube with a smaller diameter and a thicker cross section was engineered to increase rigidity and strength while reducing the transfer of what little vibration emanates from the V-Four. With improved bar angles for less fatigue.
Specifications:
1 5/8” Taller 7/8” RearwardRide with confidence knowing you are riding with the safest, most comfortable set of handlebars available.
HeliBars® Honda VFR750 replacement handlebars Retains: Stock Cables, Hydraulic Lines and Bar Ends and Silver Powder Coat
Honda CBR250R Replacement Handlebars
(2011-2013)
Description:
The CBR250R may be a small sportbike but it’s a BIG hit with it’s owners. It’s fuel economy makes it both a first choice as a commuter as well as a fun ride through the twisty bits of your favorite roads. We decided to do our magic on the 250R by blessing it with the newest member of the hand built steel HeliBars.
We gave it the tallest, most rearward hand grip position allowed by the fairing, tank, hydraulic lines and cables. Installation is a snap and all factory components are retained. This is a simple 1 hour installation.
So, enjoy this small, fuel efficient machine with big comfort results from our NEW CBR250R HeliBars.
You may find yourself sport touring longer distances.
Specifications:
1 1/2” taller than stock 1 1/4” rearward stock width retains all stock lines, cables & factory damper assemblies
Honda VFR1200 DCT Replacement Handlebars
(2010-2015)
Description:
Heli Modified started making VFRs more comfortable in 1986 and has sold tens of thousands of HeliBars to VFR customers around the world. Heli Modified knows VFRs, and VFRs with HeliBars equals Comfort Without Compromise! Check out the recent articles in Motorcyclist Magazine Dec 2011 & June 2012 !
1” Rearward 1 3/4” Taller 1” Wider (at 26 1/2) 8 degree reduction in downward angle 3.18 degree reduction in rearward angle**NOTE: When R&D was conducted on the VFR1200 & VFR1200 DCT the stock bikes did not include the optional wind screen. The optional wind screen can interfere on the left side at full lock to lock. We have heard from the field that pulling the left bar back towards the rider as close as possible without contacting the fairing alleviates this situation.
Honda CBR1000RR Replacement Handlebars
(2004-2014)
Superbike performance with improved ergonomics = Super Sport Tourer.
HeliBars® recently had the pleasure of bringing into the shop a 2008 CBR1000RR for re-design and fitment. While conducting the re-design our engineering staff found a way to re-route cables and lines so that the brake line wouldn’t have to be changed out – saving our customers money in the long run.
1 3/4” taller 1” rearward 27” width Black Powder Coat Retains Stock Lines & Cables
Suzuki SV1000S RISER HANDLEBARS (2003-2010)
No Longer Available since 2014
Description:
HeliBars® Suzuki SV1000S handlebar and riser:
2” Taller up to 1” RearwardAll stock cables and hydraulic lines are retained, and bar end weights are accepted.
Suzuki SV650S Replacement Handlebars
Description:
HeliBars® Suzuki SV650S replacement handlebars.
1 1/4” taller 1” rearward 1 1/2” wider Retains stock cables and hydraulic lines.Available in Silver Powder Coat
Kawasaki ZX12 Replacement Handlebars (2000-2005)
Description:
HeliBars® Kawasaki ZX12 replacement handlebar replacement system:
2 1/4” Taller 5/8” More Rearward 5/8” Wider Overall Kit includes longer clutch cable, all other stock lines retained
HeliBars® handlebar risers for BMW R1200RT LC
Product Description
HeliBars® Replacement Handlebars and Risers for the BMW R1200RT LC (all years from 2014)
1 3/4 (44.5mm) Taller** (compared to original position) 1 1/4 (32mm) Rearward** (compared to original position) 2 (50mm) Wider** (compared to original position)HeliBars distinct styling maintains the stock aesthetic while giving the rider optimum height and pullback. Our unique design incorporates a key safety feature to keep the bars from rotating too far forward or rearward in the top triple tree.
Please note: A handlebar removal tool is required to remove the stock handlebars which are pressed in at the factory, they will not just “slip” out of the top cast triple tree. In order to aid in installation, HeliBars has produced a simple yet effective handlebar removal tool which will be included with your order. If your dealer / installer already has a removal tool, it can be excluded from your order.
Wrist angle optimised for a significant improvement in comfort All original cables and hydraulic lines are retained and bar end weights are accepted Exceptional build quality backed by a 30 day money back satisfaction guarantee**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
CBR600F4/F4i 1996-2006 HELIBARS
Last set in captivity. No longer available from HELIBARS
1& 1/4” TALLER
1” REARWARD
1 1/2 “ WIDER OVERALL
32mm taller
25mm rearward
38mm wider
Kawasaki ZZR600/ZX6R/ZX9R Replacement Handlebars
NO LONGER AVAILABLE
Description:
HeliBars® Kawasaki ZX9R replacement handlebars:
1 1/2” Taller 1/2” More Rearward 1/2” Wider Overall Retains stock cables, hydraulic lines ZX6R (2000-2002) ZX9R (2000-2004) ZZR600 (2005-2008)
REPLACEMENT CLUTCH CABLE for HELIBARS HB04082 (HB4012K)
ZX12R 2000~2005
Longer clutch cable as supplied with HB04082 (formerly HB4012K) HELIBARS for ZX12R
SUZ GSF1200 BANDIT 1996~2004 HELIBARS
Last set in captivity
NLA from HELIBARS
Last set in captivity (no longer available from Helibars)
2-3” (50-75) Taller
0-2” (0-50) Rearward
Adjustable Wrist Angle
Kit includes longer front Brake hydraulic line by Galfer
HELIBARS KAWA GTR1000 1987-2006
Last set in captivity
Now discontinued & no longer available from Helibars
Last set in captivity
UP 3” (75) REARWARD TELESCOPIC
HELIBARS ST1300 POLICE EDITION
1.5” (37mm) taller
2.5 (75mm) rearward
more comfortable handlebar angle
retains stock cables, lines etc
POLICE VERSION ONLY (HAS A DIFFERENT THROTTLE HOUSING)
Fits the police version only and will not work on a standard ST1300 without considerable and costly modifications
Yamaha FJR1300 Handlebar Risers, 2001-2005
Description:
HeliBars® Tour Performance® Yamaha FJR1300 Handlebar Riser Adapters by HeliBars
Install beneath your stock bars and raise them 1” (25mm.)
By off-setting the bar remount location back, out and rotating the bolt pattern, the hand grips are re-positioned 1 3/4” closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation. Machined Aluminium
HeliBars® Tour Performance” Handlebar Risers for the Kawasaki ZZR1400 / ZX-14R (ABS & non-ABS models – all years)
**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
The cut-outs in the forward sides of the fuel tank / air filter cover and the “wind cheating” fairing left little room for a taller and more offset Heli Bar, so Heli did the next best thing. They raised the factory bars with their Tour Performance handlebar riser.
Honda ST1300 Handlebar Riser
Standard Model (2003-2013)
Additional update features:
Larger more rigid rubber anti flex bumpers greatly reduce unwanted handlebar movement. Drain holes placed at the bottom of the main mounting bolt counter bores eliminates water from pooling and rusting the hardware. Re-designed shape with contoured cover vastly improves appearance fit and function. Allows easier access to air filter maintenance. Contoured cut channels position control housing wire looms neatly in place and keeps them from being pinched by the fuel tank at full lock positon. Improved viewing in mirrors. 3 different models to give you those additional features you may require.Genuine HeliBars Comfort Without Compromise.
Honda ST1300 Handlebar Risers with Ram Ball (2003-2013)
4 Degree decrease in Ram Ball mounting Angle. New Cover design positions Ram Ball at a more vertical angle reducing stress to the threaded mount greatly reducing the chance of the Ram Ball coming loose.
New Logo – Traditional HeliBar Logo added. New styling details – lower overall adapter weight. Gen3 Modifications in 2010
2 Taller (50mm) than stock (1 higher than our original design) 2.5 Rear Offset (62mm) closer to the rider (1/2 additional reduction in reach than our original design) 2 ½ degree reduction in handgrip rearward angle. This single update is the most significant in terms of true long distance comfort because it rotates the riders wrist into a more natural position.Additional update features:
Larger more rigid rubber anti flex bumpers greatly reduce unwanted handlebar movement. Drain holes placed at the bottom of the main mounting bolt counter bores eliminates water from pooling and rusting the hardware. Re-designed shape with contoured cover vastly improves appearance fit and function. Allows easier access to air filter maintenance. Contoured cut channels position control housing wire looms neatly in place and keeps them from being pinched by the fuel tank at full lock positon. Improved viewing in mirrors. 3 different models to give you those additional features you may require.
Honda ST1300 Handlebar Risers – Pilot Model (2003-2013)
HR01033 no longer available but HR01029 & HR01032 still available Sep 2020
HELIBAR NT700 PILOT RISER
Additional details:
Improving your reach by moving the handlebar back towards the rider 4.163” this kit includes the following:
2 1/2” Taller 3 1/2” Rearward 4 1/8” Overall net gain to rider Riser – with Powerlet Outlet and Ram Ball installed. Brakeline Clutch cable Push and Pull Throttle Cables
HELIBARS Tour Performance Riser Handlebars
Honda CBR500R/RA
NO LONGER AVAILABLE
Description:
HeliBars is pleased to announce it’s latest product in the Tour Performance line of Handlebar Risers. This unique design offers comfort and control along with beautiful aesthetics for the Honda CBR500R & CBR500R-ABS model bikes.
38mm Taller than stock 63.5mm Rearwards (toward the rider) 12.7mm Wider than stock Hydraulic Brake Line extension included in the kit Works with all other stock components CNC machined from Solid 6061 Billet Aluminum Coated in a beautiful UV resistant Black Powdercoat finish.
HeliBars Tour Performance handlebar risers for Honda CRF1000L Africa Twin
HeliBars Tour Performance handlebar riser adaptors for the Honda VFR800 2014 onwards (not compatible for earlier years)
3/4” (19mm) taller**
5/16” (8mm) rearward**
All original cables and hydraulic lines are retained
Complimentary bronze powder coat
Easy installation (under 45 minutes)
HeliBars Tour Performance handlebar risers
2018+ Honda GL1800
HeliBars Tour Performance™ handlebar risers for 2018+ Honda GL1800 GOLD WING
HELIBAR FOR HAYABUSA GEN 3 2021 ONWARDS.
EXPECTED DATE OF ARRIVE TO AUSTRALIA, MID NOVEMBER 2021.
Kawasaki GTR1400 C14 Handlebar Risers,
Pilot Model (2008-2012)
Description:
HeliBars® Kawasaki Concours14 handlebar riser. Updated in 2009 our standard riser for the rider who wants more comfort without any additional features. With a 2 inch rise our adapter is 1/4 inch taller than our earlier design with a clean appearance and solid function.
Want more pull back? See our latest model.
The new HeliBar Tour Performance HR adapter offers:
51mm (2”) increased handlebar height 19 mm (3/4”) rear offset to reduce reach to grips CNC machined from extruded 6061T6 aluminum Finished in a silver powder coat Removes bar and hand distractions in the rearview mirrors due to the bars and controls being moved up and out of the field of viewUses all stock cables and hydraulic lines
Complete kit contains everything for installation
Kawasaki C14 (GTR1400) Handlebar Risers,
Standard Riser (2008-2012)
HeliBars® Kawasaki Concours14 handlebar riser. Updated in 2009 our standard riser for the rider who wants more comfort without any additional features. With a 2 inch rise our adapter is 1/4 inch taller.
The new HeliBar Tour Performance HR adapter offers:
Uses all stock cables and hydraulic lines
Complete kit contains everything for installation