Coarse Thread Brake Pressure Switch, 10mm x 1.25p

These universal switches allow rearset and front brake master cylinder users to operate the brake light. This all-in-one unit replaces the banjo bolt that connects the master cylinder to the brake line. You simply replace the bolt with this assembly and splice the wires into your existing brake light switch. The pressure inside your brake system then activates the brake light.

Fitment
All modern Honda, Kawasaki, Triumph, Yamaha, Suzuki, all Japanese.
Yamaha 2002 & up
Suzuki 2003 & up (SV & GSXR1000) 04+ (all other)

These universal switches allow rearset and front brake master cylinder users to operate the rear brake light. This all-in-one unit replaces the banjo bolt that connects the master cylinder to the brake line. You simply replace the bolt with this assembly and splice the wires into your existing brake light switch. The pressure inside your brake system then activates the brake light.

Applications:
All modern Aprilia, Ducati, Brembo, Magura.
Yamaha up to 2002,
Suzuki up to 02 (most) & 2003 only GSXR600/750

300mm BOLT for 50-0670 FRAME SLIDER BASE KIT

12mm x 300mm Socket Cap Coarse Thread Bolt (50-0640/2R)

Kaw Rearset Kit – ZX6 ’95-97, ZX7 ’91-04, ZX9 ’94-97

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up 1” and back 1/2”

Will not fit the ZX6E

Note: This rearset can be used in either Standard or GP shift.

Kaw Rearset Kit – ZX6 ’98-02, ZX9 ’98-03, ZZR600 ’05-08

Phone or email for latest pricing.

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.

Up 1” Back 1”

Note: This kit can be run standard or GP shift.

Moves pegs up and back 1”

05-0110B Kawasaki ZX6 1998-02 ZX9 1998-03 ZZR600 2005-08 Complete Rearset Kit w/ Pedals – STD/GP Shift

Kawasaki ’12-14 Ninja 650R Complete Adjustable Rearset Kit W/Shift & Brake Pedals, Black

Woodcraft rearsets for the 2012-2015 Kawasaki Ninja 650R.

Phone or email for latest pricing

The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet shift and brake pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

Kawasaki Ninja 650R ’06-08 Rearset Kit w/ Shift Pedal

The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet shift pedal and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kits saves almost 7 pounds and allows for both standard and GP shifting. In the event that you need replacement parts any individual piece of this kit is available.

This kit includes 2 footpeg height options – a track day height and a full race height. Track Day – Up 3/4”, Back 1”. Full race – Up 1.25”, Back 1.25”.

PHOTO SHOWS FULL KIT WITH BOTH PEDALS – BRAKE PEDAL NOT INCLUDED IN THIS KIT

Kawasaki Ninja 650R ’09-11 Complete Rearset Kit W/Shift & Brake Pedals, Black
Contact us for latest pricing

The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kits saves almost 7 pounds and allows for both standard and GP shifting. In the event that you need replacement parts, any individual piece of this kit is available.

This kit includes 2 footpeg height options – a track day height and a full race height. Track Day – Up 3/4”, Back 1”. Full race – Up 1.25”, Back 1.25”.

Kaw EX250 ’88-07 Rearset Kit Complete W/Pedals, Silver

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kit are complete with our CFM 3 piece shift and brake pedals.

They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up 1” and back 2”

Note: This kit can be run either standard or GP shift.

Kaw ZX6RR/636 ’03-04 Rearset Kit

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Most kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up and back 1/2”

Note: This kit can be used in either standard or GP shift.

Kaw ZX6/636 ’03-04 Complete Rearset Kit W/Shift & Brake Pedals

The complete rearset kit consists of the rearset plates, footpegs, our 3 piece CFM billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up and back 1/2”

Note: This kit can be used in either standard or GP shift.

Kawasaki 2018 Ninja EX400 Adjustable RearSet Kit Complete W/Pedals, Black

Kaw ZX6R ’05-06 Rearset Kit

The basic rearset kit consists of the rearset plates, adjustable footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. There are 6 possible locations for the eccentric pegs. The kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up 3/4” (adjustable +/- 1.4”) and back 1/2” (adjustable +/- 1/4”.)

Note: This kit can be run in either standard or GP shift.

Kaw ZX6/636 ’05-06 Complete Rearset Kit W/Shift & Brake Pedals

The complete rearset kit consists of the rearset plates, adjustable footpegs, our CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing, and has 6 possible peg locations. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up 3/4” (adjustable +/- 1.4”) and back 1/2” (adjustable +/- 1/4”).

Note: This kit can be used in either standard or GP shift.

Kaw ZX6R ’09-11 Rearset Kit Complete W/Brake & Shift Pedals, Black

The complete rearset kit consists of the rearset plates, adjustable footpegs, and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kit is designed specifically for the 09 ZX6R to give you the optimum foot position and ground clearance for racing. There are 6 possible locations for the eccentric pegs. This kit includes CFM 3 piece billet shift and brake pedals.

Moves pegs up 1” (adjustable +/- 1.4”) and back 1/2” (adjustable +/- 1/4”)

Note: This kit can be used in either standard or GP shift.

Kaw ZX6R 2013 Rearset Kit Complete, Black

The complete rearset kit consists of the rearset plates, adjustable footpegs, and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kit is designed specifically for the ZX6R to give you the optimum foot position and ground clearance for racing. This kit includes CFM 3 piece billet shift and brake pedals.

Moves pegs up 1” (adjustable +/- 1/4”) and back 1/2” (adjustable +/- 1/4”).

Note: This kit can be used in either standard or GP shift.

Kaw ZX-10R ’04-05 Rearset Kit

The basic rearset kit consists of the rearset plates, adjustable footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. The kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up 1/2” (adjustable +/- 1.4”) and back 1/2” (adjustable +/- 1/4”)

Note: This kit can be used in either standard or GP shift.

Kaw ZX10R ’04-05 Complete Rearset Kit W/Shift & Brake Pedals

The complete rearset kit consists of the rearset plates, footpegs, our CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up 3/4” (adjustable +/- 1.4”) and back 1/2” (adjustable +/- 1/4”)

Note: This rearset can be used in either standard or GP shift.

Kawasaki ZX10 ’06-10 Rearset Kit, BLACK

The basic rearset kit consists of the rearset plates, adjustable footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. There are 6 possible locations for the eccentric pegs. The kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up 3/4” (adjustable +/- 1/4”) and back 1/2” (adjustable +/- 1/4”)

Note: This kit can be run in either standard or GP shift.

Kaw ZX10 ’06-10 BLACK – Complete Rearset Kit W/Shift & Brake Pedals

Phone or email for latest pricing.

The complete rearset kit consists of the rearset plates, adjustable footpegs, CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing, and has 6 possible peg locations. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up 3/4” (adjustable +/- 1/4”) and back 1/2” (adjustable +/- 1/4”)

Note: This rearset can be run in either standard or GP shift.

Kawasaki ZX10 2011+ Complete Rearset Kit (Standard Shift)

Woodcraft is proud to introduce our standard shift rearsets for all new Kawasaki ZX10R. The rearset kit consists of the rearset plates, footpegs, heel guards and all of the needed hardware (shift rods, etc) to install the kit properly. They are much stronger than OEM rearset’s and will give your bike a look that will separate you from the crowd.

Designed to give you the optimum foot position and ground clearance for racing or track days. This kit has 6 possible peg locations along with 2 mounting locations moving the pegs in the following range : (Up 1/4-1” &Back 1/4-3/4”). Kit includes CFM 3 piece billet shift and brake pedals.

Our rearsets are machined from tough, aircraft grade 6061 T6 aluminum. We chose this material specifically because it provides the best combination of strength and durability. Other grades, such as 7075 generally tend to crack, instead of bend, when they are met with an impact. The use of 6061 allows our brackets to simply bend under stress instead of snapping off or cracking when they are crashed heavily. Rearsets made from 6061 can be often bent straight or even be welded (by a certified welder) whereas 7075 tends simply to crack or break and is much more difficult to weld.

Note: Replacement parts are available under the “Spare Parts” tab.

(Up 1/4-1” & Back 1/4-3/4”)

Kawasaki ZX10 2011+ Complete Rearset Kit (GP Shift)

Phone or email for latest pricing.

Woodcraft is proud to introduce our GP shift rearsets for all new Kawasaki ZX10R. The rearset kit consists of the rearset plates, footpegs, heel guards and all of the needed hardware (shift rods, etc) to install the kit properly. They are much stronger than OEM rearset’s and will give your bike a look that will separate you from the crowd.

Designed to give you the optimum foot position and ground clearance for racing or track days. This kit has 6 possible peg locations along with 2 mounting locations moving the pegs in the following range : (Up 1/4-1” &Back 1/4-3/4”). Kit includes CFM 3 piece billet shift and brake pedals.

Our rearsets are machined from tough, aircraft grade 6061 T6 aluminum. We chose this material specifically because it provides the best combination of strength and durability. Other grades, such as 7075 generally tend to crack, instead of bend, when they are met with an impact. The use of 6061 allows our brackets to simply bend under stress instead of snapping off or cracking when they are crashed heavily. Rearsets made from 6061 can be often bent straight or even be welded (by a certified welder) whereas 7075 tends simply to crack or break and is much more difficult to weld.
Uses OEM Shift Rod
Note: Replacement parts are available under the “Spare Parts” tab.

(Up 1/4-1” & Back 1/4-3/4”)

Kawasaki ZX10R 2016 REARSETS
Complete Rearset Kit Std/GP Shift, Black

Phone or email for latest pricing.

Woodcraft rearsets for latest model ZX10R
Can be set up for Standard gearshift or GP gearshift

Suz TL1000S Rearsets

Phone or email for the latest pricing.

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. The kits are upgradeable at any time to accept the CFM 3 piece billet shift and brake pedals.

Moves pegs up and back 3/4”.

Suz TL1000R Rearsets

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. The kits are upgradeable at any time to accept the CFM 3 piece billet shift and brake pedals.

Moves pegs up and back 3/4”.

Suzuki TL1000R – Complete Rearset Kit W/Shift & Brake Pedals

The complete rearset kit consists of the rearset plates, footpegs, CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up and back 3/4”.

Suz GSXR600 ’97-00, GSXR750 ’96-99, SV650/S ’99-02 Std Rearsets

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up and back .75” on the GSXR.
Moves pegs up and back 1.5” on the SV650.
Moves pegs up and back .75” on the SV650S.

Note: Can be used in either standard or GP shift.

Suz GSXR600 ’97-00, GSXR750 ’96-99, SV650/S ’99-02 – Complete Rearset Kit W/Shift & Brake Pedals

Phone or email for latest pricing.

The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up and back .75” on the GSXR.
Moves pegs up and back 1.5” on the SV650.
Moves pegs up and back .75” on the SV650S.

Note: Can be used in either standard or GP shift.

Suz SV650/S ’99-02 High Rearsets

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Moves pegs up and back 2” on the SV650
Moves pegs up and back 1.25” on the SV650S

Note: Can be used in standard or GP shift.

Suzuki SV650/S ’99-02 – Complete High Rearset Kit W/Shift & Brake Pedals

The complete rearset kit consists of the rearset plates, footpegs, our CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up and back 2” on the SV650
Moves pegs up and back 1.25” on the SV650S

Note: Can be used in standard or GP shift.

Suz SV650 ’03-11 Rearset Kit

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. The 04+ SV requires the use of the 3 piece billet shift pedal, which must be purchased in addition to this base kit. The 2003 may use either CFM or OEM pedals.

They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Kits are upgradeable at any time to accept our CFM 3 piece billet shift & brake pedals.

Moves pegs up and back 1.25” on the SV650.
Moves pegs up and back .75” on the SV650S.

Note: Can be used in either standard or GP shift.. Optional brake side heel guard available.

Suzuki SV1000 ’03+ – Complete Rearset Kit W/Shift & Brake Pedals

Phone or email for the latest pricing

The complete rearset kit consists of the rearset plates, footpegs, our CFM 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. This full kit is required for the 04-05 SV’s, as the OEM pedals will not fit on these brackets.

They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available. Optional brake side heel guard available.

Moves pegs up and back 1.25” on the SV.
Moves pegs up and back .75” on the SVS.

Suz GSXR600 ’01-05, GSXR750 ’00-05, GSXR1000 ’01-04 Rearset Kit

The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Kits are upgradeable at any time to accept our CFM 3 piece billet shift and brake pedals.

Up .5” Back .5”

Note: Can be used in standard or GP shift.

Moves pegs up and back 1/2”.